Storing components
If you do not install your S5048F-ON switch and components immediately, properly store the
switch and all optional components following these guidelines:
• Storage location temperature must remain constant. The storage range is from -40°C to
70°C (-40°F to 158°F).
• Store on a dry surface or oor, away from direct sunlight, heat, and air conditioning
ducts.
• Store in a dust-free environment.
NOTE: ESD damage can occur when components are mishandled. Always wear an
ESD-preventive wrist or heel ground strap when handling the switch and its
accessories. After you remove the original packaging, place the S5048F-ON switch
and its components on an anti-static surface.
10 Site preparations
To Next Page
Loading...
