OBWI Operationxxx | xxx79
Active Sessions
From the Active Sessions screen, you can view a list of active sessions and the
following information about each session: Target Device, Owner, Remote Host,
Duration, and Type.
Closing a Session
To close a session:
1 From the side navigation bar, select Active Sessions to display the SCS
Active Sessions screen.
2 Click the checkbox next to the desired target device(s).
3 Click Disconnect.
NOTE: If there is an associated locked virtual media session, it will be disconnected.
To close a session (local users only):
1 From the side navigation bar, select Local Session.
2 Select the Disconnect Active Session checkbox.
To Next Page
Loading...
