Installing The System Board
1. Align the system board to the port connectors on the rear of the chassis
and place the system board in the computer.
2. Tighten the screws to secure the system board in place.
3. Replace the fan cable.
4. Tighten the screws to secure the heatsink to the system board.
5. Install the
display assembly
.
6. Install the
palm rest
.
7. Install the
WWAN card
.
8. Install the
keyboard
.
9. Install the
hard drive
.
10. Install the
optical drive
.
11. Install the
WLAN card
.
12. Install the
memory
.
13. Install the
access panel
.
14. Install the
memory card
.
15. Install the
battery
.
16. Follow the procedures in
After Working Inside Your Computer
.
91
To Next Page
Loading...
