Wireless card
Removing the wireless card
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
The following images indicate the location of the wireless card and provide a visual representation of the removal procedure.
1. Remove the screw (M2x3) that secures the wireless-card bracket to the wireless card and system board.
2. Remove the wireless-card bracket from the wireless card.
3. Disconnect the antenna cables from the wireless card.
4. Slide and remove the wireless card from the wireless-card slot.
Installing the wireless card
If you are replacing a component, remove the existing component before performing the installation procedure.
The following image indicates the location of the wireless card and provides a visual representation of the installation procedure.
Removing and installing components
31
To Next Page
Loading...
