Fan
Removing the fan
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
The following images indicate the location of the fan and provide a visual representation of the removal procedure.
1. Disconnect the fan cable from the system board.
2. Remove the two (M2x3) screws that secure the fan to the palm-rest and keyboard assembly.
3. Lift the fan off the palm-rest and keyboard assembly.
Installing the fan
If you are replacing a component, remove the existing component before performing the installation procedure.
The following image indicates the location of the fan and provides a visual representation of the installation procedure.
Removing and installing components
33
To Next Page
Loading...
