Power button with optional fingerprint reader
Removing the power button with optional fingerprint reader
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the I/O board.
The following images indicate the location of the power-button with optional fingerprint reader and provide a visual
representation of the removal procedure.
1. Remove the screw (M2x3) that secures the power button with optional fingerprint reader to the palm-rest and keyboard
assembly.
2. Lift the power button with optional fingerprint reader off the palm-rest and keyboard assembly.
Installing the power button with optional fingerprint reader
The following images indicate the location of the power button with optional fingerprint reader and provide a visual
representation of the installation procedure.
Removing and installing components
49
To Next Page
Loading...
