1. Align and place the power button with optional fingerprint reader on the palm-rest and keyboard assembly.
2. Replace the screw (M2x3) that secures the power button with optional fingerprint reader to the palm-rest and keyboard
assembly.
1. Install the I/O board.
2. Install the base cover.
3. Follow the procedure in After working inside your computer.
Power-adapter port
Removing the power-adapter port
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
The following images indicate the location of the power-adapter port and provide a visual representation of the removal
procedure.
50
Removing and installing components
To Next Page
Loading...
