NOTE: When removing the system board to replace/access other parts, the system board can be removed and installed
with the heat sink attached in order to simplify the procedure and preserve the thermal bond between the system board
and heat-sink.
The following image indicates the connectors on your system board.
Figure 1. System board connectors
1. Display cable connector
2. Power-adapter port cable connector
3. Keyboard backlit cable connector
4. Keyboard cable connector
5. Touchpad cable connector
6. Battery cable connector
7. Fan cable connector
8. Speaker cable connector
9. I/O-board cable connector
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
Removing and installing components
53
To Next Page
Loading...
