Dell Vostro 7500 - Removing and Installing the Base Cover

Component Screw type Quantity Screw image
Hinge screws
M2.5x5
M2.5x4
2
2
I/O board
M2x3 1
Power button with fingerprint
reader
M1.6x2.5
2
DC-in port
M2x3 1
Touchpad
M2x2
M1.6x2
3
2
Display assembly
M2.5x5
M2.5x4
2
2
System board
M2x3 4
Base cover
Removing the base cover
Prerequisites
Follow the procedure in before working inside your computer.
About this task
The figure indicates the location of the base cover and provides a visual representation of the removal procedure.
Disassembly and reassembly
13