Option Description
NOTE: Errors deemed critical to the operation of the system hardware always halt the
system.
USB-C Warnings
This option enables or disables dock warning messages.
Enable Dock Warning Messages — this option is enabled by default.
Fastboot
This option allows you to configure the speed of UEFI boot process.
Select one of the following options:
• Minimal
• Thorough — this option is enabled by default
• Auto
Extend BIOS POST Time
This option allows you to configure the BIOS POST load time.
Select one of the following options:
• 0 seconds — this option is enabled by default.
• 5 seconds
• 10 seconds
Connection options
Table 15. Connection
Option Description
Integrated NIC
Integrated NIC controls the onboard LAN controller. It allows pre-
OS and early operating system networking features to use any
enabled NICs when UEFI networking protocols are installed and
available.
The options are:
• Disabled
• Enabled
• Enabled with PXE - This option is enabled by default.
Wireless Device Enable
Allows you to enable or disable the internal wireless devices.
The options are:
• WLAN
• Bluetooth
Both the options are enabled by default.
Enable UEFI Network Stack
Allows you to control the onboard LAN controller. It allows pre-OS
and early operating system networking features to use any enabled
NICs when UEFI networking protocols are installed and available.
Enable UEFI Network Stack - This option is enabled by default.
Performance
Table 16. Performance
Option Description
Multi Core Support
This field specifies whether the process has one or all cores
enabled. The default value is set to the maximum number of cores.
74 System setup