Dell Vostro 7500 - Replacing the SSD-1 Support Bracket

Steps
1. Align the solid-state drive bracket to accommodate the M.2 2280 solid-state drive.
2. Slide the solid-state drive module firmly into the solid-state drive slot at an angle.
3. Place the solid-state drive module shield.
4. Replace the single screw (M2x3) that secures the solid-state drive module shield to the palm-rest and keyboard assembly.
Next steps
1. Connect the battery.
2. Install the base cover.
3. Follow the procedure in after working inside your computer.
Replacing the SSD-1 support bracket
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the base cover.
3. Remove the battery.
4. Remove the M.2 2280 SSD or M.2 2230 SSD.
About this task
The figure provides a visual representation of the replace procedure.
24
Disassembly and reassembly