Engine Oil Temperature Page One
Main Trans Oil Temperature Page One
Manifold Pressure (Boost) Page One
DPF Status Page One
Fuel Economy Page One
Percent Torque Page One
Percent Horsepower N/A
Idle Time N/A
Idle Fuel N/A
Preset Gauges Interaction
The positions of the active gauges can be adjusted in the General Settings
screen of the Virtual Gauges app by selecting a gauge and dragging it to a
new desired position.
Individual gauges can be moved by selecting and then dragging to a new
position. As the gauge is dragged it will snap into the closest gauge slot
even if the slot is already occupied by another gauge. The gauge will be
moved to the location shown when the user deselects the gauge.
While a gauge is being moved and starts snapping in other gauge slots in
the General Settings screen of the Virtual Gauges app, the non-moving
gauges re-position to give space to the dragged gauge.
The re-positioning of the non-selected gauges from the General Settings
screen of the Virtual Gauges app shall be according the following rules:
• Gauges in the preceding slots will shift back one p
osition until the
position where the selected gauge was originally is reached.
• Gauges in slots after where the selected gauge snaps will remain
unaffected.
Once the user stops pressing the screen, all the gauges will be moved and
the gauge selected keep their new positions.
Only one gauge can be moved at a time in the General Settings screen of
the Virtual Gauges app.
While moving a gauge position in the General Settings screen of the Virtual
Gauges app, if the user moves the gauge to one of the sides of the screen,
the Virtual gauges app will switch to the next/previous page, depending on
the side. In this case, right side is related with the next page and the left side
is related with the previous page.
The page movement when a gauge is moved to a one of the side of the
screen is subject to the following restrictions:
• The page switching shall be restricted to the active
pages
• If the gauge is moved to the left side of the screen while in the first
page no action shall be performed
• If the gauge is moved to the right side of the screen while in the last
active page no action is performed
Reset to Default Screen
If the Reset to Default Soft key from the General Settings of the Virtual
Gauges app is depressed, the Virtual Gauges app shall restore the gauge
priority list to the Default Virtual Gauges priorities, updating also the position
of the gauges in the Settings Screen and in the Virtual Gauges app.
When short pressed, prior to resetting to the Default Virtual Gauges priorities
the Virtual Gauges app displays the following Pup-up warning. See Figure
80 as reference.
To Next Page
Loading...
Need help?
General
