Bead Annealing Pre-Programmed Firing Programs
bd1 Segment Rate, °/Hr Set Point Temp Hold/Soak Time
Small Beads (1/2") 1 500° F 980° F 5 min
2 300° F 670° F --
bd2 Segment Rate, °/Hr Set Point Temp Hold/Soak Time
Medium Beads (1") 1 400° F 980° F 10 min
2 150° F 670° F --
bd3 Segment Rate, °/Hr Set Point Temp Hold/Soak Time
Large Beads (2") 1 300° F 980° F 20 min
2 100° F 670° F --
bd4 Segment Rate, °/Hr Set Point Temp Hold/Soak Time
Continuous Annealing 1 FULL 960° F 4 hours
as you Create 2 FULL 960° F 1 hour
3 600° F 400° F --
To Next Page
Loading...