Delphi EZ-Pro 15-6 Kiln - Kiln Specifications; Model AF4 P 15;6 Data

9
KILN SPECIFICATIONS
To operate the kiln safely and efficiently, your kiln needs the proper electrical outlet with
the correct electrical capacity and voltage. The chart below will assist you in the
selection of the proper wire and breaker size for your Jen-Ken Kiln. A licensed
electrician or the local power company should determine if you have the proper voltage
and wiring.
Model
Width
Depth
CU/FT
Max
Temp
Volts
Amps
Watts
Receptacle
Ship
Weight
Orton
Auto Fire
3 Button
Uses a 3 Button Controller with One 8 Segment Program
– For Simple Programs
AF4P
15/6
15”
6.5”
.66
1700
120
15
1800
5-15R
85