Delta Controls eZVP-440 User Manual

eZV-440 Version 2.1 Application Guide
Page 32 of 67
Document Edition 2.5
LINKnet I/O Tab
The eZV-440 controller is designed to work with a DNS-24L or eZNS network sensor on its
LINKnet port. This section describes how to set up one of these network sensors using the
LINKnet I/O tab in this configuration graphic.
The eZV-440 controller detects the type of network sensor that is connected to it and displays
only the fields in the configuration graphic that are relevant to that network sensor.
Device Information
If no LINKnet device is connected to the controller, you can select a network sensor device from
the drop-down list in the
Model # field. This allows you to program offline.
When a DNS-24L or eZNS network sensor is physically connected to the controller, the model
number of that device is displayed in the
Model # field. Its current operational status is also
displayed in the
Status field.

Delta Controls eZVP-440 Specifications

General

Brand	Delta Controls
Model	eZVP-440
Category	Controller
Language	English