Delta Controls eZVP-440 User Manual

eZV-440 Version 2.1 Application Guide
Page 66 of 67
Document Edition 2.5
Document Revision History
Document Edition Number
Date Published
Author
Change Description
1.0
October 1, 2014
Nathan Hampton
First publication
1.1 November 27, 2014
Nathan Hampton
Greg Holloway
Added more information about
programmable controller
programs in the Configurable and
Programmable section.
Added the variables used to
override the algorithm.
Deleted the config graphic warning.
Added GCL+ limitations and a new
appendix C.
1.2
February 3, 2015
Norlinda Ghazali
Removed the word “hybrid”.
2.0 April 2, 2015 Norlinda Ghazali
New screenshots and content
about the new firmware version
2.01 and 2.02 and new config
graphic B-91035.3. Deleted
references to Flow Failure Damper
Position field in the config graphic.
New Air Balancing tab on the
config graphic.
Deleted Appendix C about
supported and unsupported GCL
functions. Refer users to KBA 2137.
Firmware 2.0.2 algorithm changes
documented.
Minor update to 2.0 April 27, 2015 Norlinda Ghazali
In the Alarming section, added an
update about custom alarm
messages.
2.1 June 4, 2015 Norlinda Ghazali
Added a section about data
exchange.
2.2 June 8, 2015 Norlinda Ghazali
New content to the data exchange
section. Also added a note in the
LINKnet section about lack of
support for DFM I/O modules.
2.3 June 24, 2016 Norlinda Ghazali
Added open source licensing
appendix.
2.4 July 6, 2016 Norlinda Ghazali
Firmware 2.1 release changes—
bug fixes. The heating and cooling
sections in the Sequences of
Operations chapter have been
rewritten. New Demand Control
Ventilation section. New CO2
Occupancy section.
Corrections to series fan
sequences. Custom buttons for
LINKnet devices.
2.5 February 17, 2017 Norlinda Ghazali
Corrected the setpoint calculations
in the Occupancy Modes section
under Sequence of Operations.

Delta Controls eZVP-440 Specifications

General

Brand	Delta Controls
Model	eZVP-440
Category	Controller
Language	English