14
8. Manual mode
This mode is used to choose a temperature seing (5 to 30°C) that remains
constant. This seing may be restricted (menu 2-01 = 1).
Turn the knob to exit the mode.
9. Absence mode
10. Off mode
This mode switches o your heating system.
Turn the knob to
.
In this mode, the device only displays the room temperature.
5°C
30°C
2
3
1
In this mode, programming is no longer taken into account.
131 112 2021 ...
28/02/2021
00.00
1
2
3
4
5
This mode lets you place your home under Frost Protection if you need
to leave for several days.
The Frost protection setpoint is adjustable (see «Adjusting temperatures»).
❶ Turn the knob to
.
❷-> ❹ Set the return date with + or -, then conrm
with OK (❺). The countdown begins.
❻ Return to initial mode (AUTO or manual) at the end
of the countdown, at 0h00.
- To make changes to the current mode, press OK.
- To cancel, turn the selector knob.
Temperature set in
absence mode
Number of days
remaining before reset
to initial mode (AUTO or
manual)