DELTA DORE Tybox 1117 - Description; Automatic Mode (AUTO); Override

9
1. Description
2. Automatic mode (AUTO)
Turn the selector knob to AUTO.
Your thermostat will function according to the set programme.
Depending on the conguration during installation, your unit will
continuously display the setpoint temperature or the room temperature
(menu 2-04).
If you are in the programmed Economy period, and the
symbol
ashes and the Comfort setpoint is displayed, it’s because pre-heating
is in progress (see § Pre-heat function).
3. Override
In AUTO mode, you can use override to change the setpoint temperature until the next programme change.
Example: it is 15:30 and you would like to switch to
Comfort mode before the set time (17:00).
To cancel the current override, press the buon once more.
A
G
E F
B
C
D
A
Selector knob
B
Programme prole
C
Room
Day (1 = Monday)
Time
Current setpoint
Information
Low baeries
O mode
Absence mode
Manual mode
AUTO Follows programming
Date and time seings
PROG Programming
Adjusting
setpoint temperature seings
Comfort
Economy
Frost protection
6h 8h
24h0h
17h 23h
6h 8h 0h0h 17h 23h
15h30
1
2
3
❶ Press
the buon
❷ Override
in progress
❸ At 17:00, the programme will
return to its usual schedule.
USE
H