Chapter 5 Parameters|VFD-S Series
5-56 Revision August 2008, SE09, SW V2.61
d20 Software protection enable (codE)
d21 Reserved
d22 CPU failure (cF3.1)
d23 CPU failure (cF3.2)
d24 CPU failure (cF3.3)
d25 CPU failure (cF3.4)
d26 CPU failure (cF3.5)
d27 CPU failure (cF3.6)
d28 CPU failure (cF3.7)
d29 Hardware protection failure (HPF.1)
d30 Hardware protection failure (HPF.2)
d31 Hardware protection failure (HPF.3)
d32 Communication time-out (CE10)
d33 Reserved
d34 Software error (SErr)
d35 Reserved
d36 PID error (Pld)
d37 Reserved
d38 Phase loss (PHL)
Pr.6-08 to 6-10 store records of the three most recent faults that had occurred. Use the reset
key to reset the drive when the fault no longer exits.
To Next Page
Loading...
Need help?
General
