AH Motion Controller – Operation Manual
8-16
path. If the path specified point to a file which exists in the computer, the file will be overwritten after the data
restoration is performed.
(4) After you make sure that the summary in the CARD Utility window is consistent with the desired data restoration
operation, you can click Execute.
If you click Cancel in the process of restoring data to the CPU, the data will not be completely restored. To prevent the
CPU from incorrect operation, you have to restore the CPU to the factory setting if you do not perform the data
restoration again.
In addition, when you clicked Cancel to stop ISPSoft from restoring data from the memory card to the CPU, the CPU
will be still in data restoration process. You can power off the CPU to force stop the process.
To Next Page
Loading...
Need help?
General
