Chapter 4 Operating ISPSoft
4-27
If you right-click an object after the object is clicked, you can click an item on the context menu.
Item Function
Undo
Undoing the last action
(The number of previous actions that can be undone is 20.)
Redo
Redoing an action which has been undone
Cut
Cutting a device, a block, or a network
Copy
Copying a device, a block, or a network
Paste
Paste an object which has been copied or cut on the present position
Paste right
Pasting an object at the right side of the position selected
(The object will be connected to the position selected in series.)
Paste under
Pasting an object under the position selected
(The object will be connected to the position selected in parallel.)
Delete
Deleting a device, a block, or a network
Activate/Inactivate
Network
Activating or Inactivating the network selected
(The network which is inactivated is ignored when the program is compiled.)
You can proceed with the operation in the example.
(1) Select network 1, right-click network 1, and click Copy on the context menu.
(2) Select network 2, right-click network 2, and click Paste on the context menu. A copy of network 1 will be put above
network 2, and network 2 will become network 3.
To Next Page
Loading...
Need help?
General
