Chapter 7 Motion Control Programming
7-25
Setting a Master Axis
You can set a master axis by Master in the motion control function block MC_CamIn.
Value of the Master
1~n Motion axis
A motion axis 1~n is used as a master axis (AH08EMC: n=8，
AH10EMC: n=16, AH20EMC: n=32)
The counter AC00 is used as a master axis.
The counter AC04 is used as a master axis.
The counter AC08 is used as a master axis.
The counter AC12 is used as a master axis.
The counter AC16 is used as a master axis.
The counter AC20 is used as a master axis.
To Next Page
Loading...
