Delta AH08EMC-5A User Manual

Chapter 9 Troubleshooting
9-71
9_
Error code
Description
Corrective action
16#A406
The signal received by channel 6
exceeds the range of inputs which
can be received by the hardware.
(The ERROR LED indicator is ON.)
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 6 exceeds
the range of inputs which can be received by the hardware.
16#A407
The signal received by channel 7
exceeds the range of inputs which
can be received by the hardware.
(The ERROR LED indicator is ON.)
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 7 exceeds
the range of inputs which can be received by the hardware.
16#A600 Hardware failure
1. Check whether the backplane is normal.
2. Check whether the module operate normally.
16#A601 The external voltage is abnormal.
Check whether the external 24 V power supply to the
module is normal.
16#A602
Internal error
The CJC is abnormal.
Please contact the manufacturer.
16#A603
Internal error
The factory correction is abnormal.
Please contact the manufacturer.
16#A800
The signal received by channel 0
exceeds the range of inputs which
can be received by the hardware.
(The ERROR LED indicator is OFF.)
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 0 exceeds
the range of inputs which can be received by the hardware.
16#A801
The signal received by channel 1
exceeds the range of inputs which
can be received by the hardware.
(The ERROR LED indicator is OFF.)
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 1 exceeds
the range of inputs which can be received by the hardware.
16#A802
The signal received by channel 2
exceeds the range of inputs which
can be received by the hardware.
(The ERROR LED indicator is OFF.)
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 2 exceeds
the range of inputs which can be received by the hardware.
16#A803
The signal received by channel 3
exceeds the range of inputs which
can be received by the hardware.
(The ERROR LED indicator is OFF.)
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 3 exceeds
the range of inputs which can be received by the hardware.
16#A804
The signal received by channel 4
exceeds the range of inputs which
can be received by the hardware.
(The ERROR LED indicator is OFF.)
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 4 exceeds
the range of inputs which can be received by the hardware.
16#A805
The signal received by channel 5
exceeds the range of inputs which
can be received by the hardware.
(The ERROR LED indicator is OFF.)
Check the module parameter in HWCONFIG.
Check whether The signal received by channel 5 exceeds
the range of inputs which can be received by the hardware.

Delta AH08EMC-5A Specifications

General

Brand	Delta
Model	AH08EMC-5A
Category	Controller
Language	English