Name: Delta Amplon RT Series
Brand: Delta
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Amplon RT Series

5.2 REPO Port

The REPO port can be connected to an external switch. After the external switch

is turned to the ‘

CLOSED

¶SRVLWLRQWKH836ZLOOVZLWFKRႇWKHLQYHUWHULPPHGLDWHO\

DQGFXWRႇWKH836RXWSXWZLWKRXWWUDQVIHUULQJWRE\SDVVPRGH

NOTE :

1. You can use the management software to configure the REPO port as

normally open (NO) or normally closed (NC). The factory default setting is

normally open (NO).

2. The REPO port can also be used for ROO application, which allows you

UHPRWHO\WXUQRQRႇWKHLQYHUWHU,I\RXQHHGGHWDLOHG522LQIRUPDWLRQRU

ROO setup service, please contact your local dealer or customer service.

Please note that this port can only be modified by qualified service

personnel.

5.3 MINI Slot

The MINI slot is for mini-size cards. You can install the Mini SNMP IPv6, Mini Relay

I/O, or Mini MODBUS card in this slot to let the system have network communi-

cation, dry contact function, and MODBUS communication respectively.

5.4 USB Port

Please use the provided USB cable to connect the UPS with a computer and install

the UPSentry 2012 software*1 to check and monitor the UPS status. The USB port

has the following functions:

1. HID USB communication

 836FRQ¿JXUDWLRQZLWK((3520SURJUDPPLQJ

 836¿UPZDUHXSJUDGH

4. Event logs download

5. Dry contacts setup

NOTE :

1. *

You can download the software from the following link:

http://www.deltapowersolutions.com/en/mcis/ups-software.php.

2. Do not use the USB port and the RS-232 port simultaneously. If you

connect the USB cable (user-supplied) to the USB port, the RS-232

port will be disabled right away.

Delta Amplon RT Series Manual

Other manuals for Delta Amplon RT Series