ASDA-A2  Chapter 8  Parameters 
Revision February, 2017    8-93 
P2-04    KVP  Speed Loop Gain 
Address: 0208H 
0209H 
 
Operational 
Interface: 
Panel / Software  Communication 
Related Section: 
6.3.6 
 
Default: 
500 
 
Control 
Mode: 
ALL 
 
Unit: 
rad/s 
 
Range: 
0 ~ 8191 
 
Data Size: 
16-bit 
 
Format: 
Decimal 
 
Settings: 
Increase the value of speed loop gain can enhance the speed 
response. However, if the value is set too big, it would easily cause 
resonance and noise. 
 
P2-05    SPR  Switching Rate of Speed Loop Gain 
Address: 020AH 
020BH 
 
Operational 
Interface: 
Panel / Software  Communication 
Related Section: - 
 
Default: 
100 
 
Control 
Mode: 
ALL 
 
Unit: 
% 
 
Range: 
10 ~ 500 
 
Data Size: 
16-bit 
 
Format: 
Decimal 
 
Settings: 
Switch the changing rate of speed loop gain according to the gain 
switching condition.