Delta ASD-A2 Series User Manual

ASDA-A2 Chapter 3 Wiring
Revision February, 2017 3-47
C7: Wiring of DO signal. The servo drive applies to the external power and the resistor is
general load.
C8: Wiring of DO signal. The servo drive applies to the external power and the resistor is
inductive load.

Delta ASD-A2 Series Specifications

General

Control Mode	Position, Speed, Torque
Feedback	Incremental encoder, Absolute encoder
Rated Output Power	0.1 kW to 15 kW
Power Supply	200-230V AC
Communication Interface	RS-485, CANopen
Protection Features	Overload, Overvoltage, Overcurrent, Overheat