Chapter 8 ParametersASDA-A2R Series
Revision December, 2014
8-125
T: SYNC arrival time. The standard value is 500usec but it might
be different from the target value. Thus, the buffer is necessary.
Target value＝400 + 10 x T.
For instance, if T=5, the target value will be 450.
E: If the deviation between SYNC reaching time and the target
value is smaller than the range, it means the synchronization is
successful. (Unit: 10 usec)
P3-10
Reserved
Address: 0314H
0315H
P3-11
Reserved
Address: 0316H
0317H
To Next Page
Loading...
