Chapter 11 Specifications ASDA-A2R Series
Revision December, 2014
11-3
Vibrating
Under 20Hz, 9.80665m/s
2
(1G), 20 ~ 50Hz 5.88m/ s
2
(0.6G)
IP rating IP20
Power system TN system
*4
Approvals
IEC/EN 61800-5-1, UL 508C, C-tick
Note:
*1 When it is in rated load, the speed ratio is: the minimum speed (smooth operation) /rated speed.
*2 When the command is the rated speed, the velocity correction ratio is: (rotational speed with no load –
rotational speed with full load) / rated speed.
*3 Please refer to section 11.6 for overload features.
*4 TN system: The neutral point of the power system connects to the ground directly. The exposed metal
components connect to the ground via the protective earth conductor.
To Next Page
Loading...
Need help?
General
