Chapter 1 Installation and Model Explanation ASDA-B2
1-6 Revision May, 2018
NOTE
1. The boxes () at the ends of the servo drive model names are the
mode code of ASDA-B2. Please refer to the ordering information of
the actual purchased product.
2. The boxes () in the model names are for encoder resolution types.
= 1: Incremental type, 20-bit; = 2: Incremental type, 17-bit;
= 3: 2500 ppr; = A: Absolute type). The listed motor model name
is for information searching, please contact to your local distributors
for actual purchased product.
3. The boxes () in the model names represents brake or keyway /
oil seal.
4. The above table shows the specification of servo drive which has
triple rated current. If you need 6 times rated current for your servo
drive, please contact with local distributors. For detailed specification
of the servo motor and servo drive, please refer to Chapter 10.
To Next Page
Loading...
Need help?
General
