Delta ASD-B2-3023-B - Chapter 4 Panel Display and Operation

Revision May, 2018 4-1
Chapter 4 Panel Display and
Operation
This chapter details the panel status and operation of ADSA-B2 series servo drive.
4.1 Panel Description
Name Function
Display
Five-/Seven-segment display is for displaying the monitoring values,
parameter values and setting values.
Charge LED The Charge LED lights to indicate the power is applied to the circuit.
MODE Key
MODE Key. Pressing MODE key can enter or exit different parameter
groups, and switch among Monitor mode, Parameter mode and Alarm
Mode.
SHIFT Key
SHIFT Key. Pressing SHIFT key can scrolls through parameter groups.
After a parameter is selected and its value displayed, pressing SHIFT
key can move the cursor to the left and then change parameter settings
(blinking digits) by using arrow keys.
UP and DOWN
Key
UP and DOWN arrow Key. Pressing the UP and DOWN arrow key can
scroll through and change monitor codes, parameter groups and various
parameter settings.
SET Key
SET Key. Pressing the SET key can display and save the parameter
groups, the various parameter settings. In monitor mode, pressing SET
key can switch decimal or hexadecimal display. In parameter mode,
pressing SET key can enter into parameter setting mode.