Chapter 7 Optional Accessories CFP2000
7-28
7-5 Zero Phase Reactors
You can also suppress interference by installing a zero phase reactor. When you encounter any
interference, buy and install a zero phase reactor.
Zero Phase Reactors for Signal Cable
To solve interference problems between signal cables and electric devices, install a zero phase
reactor on the signal cable that is the source of the interference. This suppresses the noise for a better
signal. The following table lists model names and dimensions.
Unit: mm
Model A B C
RF026X00N 10.7 17.8 8.0
RF020X00N 17.5 27.3 12.3
Figure 7-29
Table 7-22
To Next Page