Delta CP2000 Series - Page 628

Chapter 14 Fault Codes and DescriptionsCP2000
14-25
ID* Display on LCD Keypad Fault Name Fault Descriptions
34
V-phase error (cd2) V-phase current detection error when power ON
Action and Reset
Action level Hardware detection
Action time cd2 acts immediately when the drive detects the fault
Fault treatment parameter N/A
Reset method Power-off
Reset condition N/A
Record Yes
Cause Corrective Actions
Hardware failure
Cycle the power.
If cd2 still exists, return to the factory for repair.
ID* Display on LCD Keypad Fault Name Fault Descriptions
35
W-phase error
(cd3)
W-phase current detection error when power ON
Action and Reset
Action level Hardware detection
Action time cd3 acts immediately when the drive detects the fault
Fault treatment parameter N/A
Reset method Power-off
Reset condition N/A
Record Yes
Cause Corrective Actions
Hardware failure
Cycle the power.
If cd3 still exists, return to the factory for repair.
ID* Display on LCD Keypad Fault Name Fault Descriptions
36
cc hardware failure
(Hd0)
cc (current clamp) hardware protection error when
power is ON
Action and Reset
Action level Hardware detection
Action time Hd0 acts immediately when the drive detects the fault
Fault treatment parameter N/A
Reset method Power-off
Reset condition N/A
Record Yes
Cause Corrective Actions
Hardware failure
Cycle the power.
If Hd0 still exists, return to the factory for repair.