5 Temperature Measurement Module DVP 04TC-E 2
DVP-ES2 Module Manual
-3
DVP04TC-E2 Celsius (°C) Fahrenheit (°F) Voltage input
Range of digital conversion
J-type: K-1000 ~ 1,1500
K-type: K-1000 ~ 1,3500
R-type: K ~ 1,7500
S-type: K0 ~ 1,7500
T-type: K-1500 ~ 3900
E-type: K-1500 ~ 9800
N-type: K-1500 ~ 1,2800
J-type: K-1480 ~ K2,1020
K-type: K-1480 ~ K26420
R-type: K ~ K3,1820
S-type: K ~ K3,1820
T-type: K-2380 ~K7340
E-type: K-2380 ~ K1,7960
N-type: K-2380 ~K23360
±8,000
Resolution 24 bits (0.1°C) 24 bits (0.18°F) 24 bits (0.01mV)
Overall accuracy
±0.3% when in full scale (25C, 77F)
±0.6% when in full scale within the range of 0 ~ 55°C (32 ~ 131F)
Response time 1s / all channels
Isolation
Optical coupler isolation between digital circuits and analog circuits.
Isolation between analog channels.
500VDC between digital circuits and Ground
500VDC between analog circuits and Ground
500VDC between analog circuits and digital circuits
500VDC between 24VDC and Ground
120VAC between analog channels
Digital data format 16 significant bits are available; in 2’s complement
Average function Supported. Available for setting up average times in CR#8 ~ CR#11. Range: K1 ~ K100.
Self-diagnosis Upper and lower bound detection in all channels
Series connection to
DVP-PLC MPU
The modules are numbered from 0 to 7 automatically by their distance from MPU. No.0 is the
closest to MPU and No.7 is the furthest. Maximum 8 modules are allowed to connect to MPU and
will not occupy any digital I/O points.
Mode 0 (H’0000): J-type, °C (°F)
+11500(21020)
-1000(-1480)
+1150-100
C
C
F)
(-148
F)
(+2102
Measured
temperature
input
Digital output
Mode 1 (H’0001): K-type, °C (°F)
+13500(24620)
-1000(-1480)
+1350-100
C
C
F)
(-148
F)
(+2462
Measured
temperature
input
Digital output
Mode 2 (H’0002): R-type, °C (°F)
Mode 3 (H’0003): S-type, °C (°F)
+17500(31820)
0 (320)
+17500
C
C
F)
(32
F)
(+3182
Measured
temperature
input
Digital output
Mode 4 (H’0004): T-type, °C (°F)
+3900(7340)
-1500(-2380)
+390-150
C
C
F)
(-238
F)
(+734
Measured
temperature
input
Digital output
Temperature / d i gita l curve
(Default: Mode 0)
Mode 5 (H’0005): E-type, °C (°F)
+9800(17960)
-1500(-2380)
+980-150
C
C
F)
(-238
F)
(+1796
Measured
temperature
input
Digital output
Mode 6 (H’0006): N-type, °C (°F)
+12800(23360)
-1500(-2380)
+1280-150
C
C
F)
(-238
F)
(+2336
gtal output
eaure
temperature
nput