Delta M125HV - 3 Installation

3 Installation
The chapter contains instructions for
(1) Mechanical installation
(2) Electrical Installation
(3) Communication setup
Figure 3-4 provides the mechanical dimensions of the inverter.
- In some locations, mounting the inverter in direct sunlight may cause the inverter
to enter a thermal derating mode. To eliminate this concern, a shade structure
over the inverter chassis may be necessary.
CAUTION !
WARNING !
- Do not install the unit near or on flammable surfaces.
- Inverter must be mounted securely to a solid / smooth surface.
- M125HV_111 is not intended for use in a residential environment, it may cause
radio interference, in which case the user may be required to take additional
mitigation measures against electromagnetic interference.
- The product supports wireless communication.
- Install the product as far away as possible from devices that emit strong radio
waves, such as civil band radio equipment.
- Do not install the product in metal box and make sure there is no metal barrier
between the product and connecting devices to prevent the communication signal
attenuation.
- When using Bluetooth to connect the inverter, make sure the device is operated
in front of the inverter within 1.5 m for the best communication quality.
CAUTION !
- Failure to comply with following mounting instructions including permitted
orientations and designated clearances may result in derated power output
and may void the warranty. To avoid these issues follow the instructions above!
CAUTION !
18
Installation