Delta M125HV - AC Wiring

Refer to Figure 3-15 in Section 3.4 for the procedure to prepare AC conductors
for connection to the AC terminals.
Ensure the AC conductors used are sized to the correct ampacity per NEC or
other local code. Refer to Figure 3-15.
3.4.5 AC Wiring
Figure 3-17: Location for AC terminal
AC terminal
PEPEL3L3L2L2L1L1
Bottom AC entry
Up to 3" trade size
gland
After inserting
conductor, torque
terminal nut by
25 N•m
outer
jacket
34
Installation