Delta M125HV - Door

In order to guarantee proper long-term operation of the inverter, procedures in
Section 5.1 must be followed.
For the first time installation, only need to open the AC side (left) door for wiring.
3.3 Door
- Use Hexagon Driver (Table2-1, Item5) or other proper tool to untighten door screws.
-Door screws are captive screw type. Do not disassemble door screws.
- Please follow the recommended torque to lock-on door screw with torque wrench.
INFORMATION
DANGER!
- It is forbidden to open both doors at the same time.
* Screw torque: 4.4 N•m
Figure 3-14: First installation of M125HV_111
29
Installation