Figure 3-24: Apply a security seal on DC side door and Communication Module
-This inverter is compliant with the “Technical Specification for Security Inspection
of Solar Inverter and Monitoring Units” required by BSMI.
- After completing the wiring operation and ensuring the cover no longer needs to
be opened, please refer to Figure 3-24 to apply a brand new one-time-use security
seal (item 10, Table2-1) .
- We will not be liable or responsible for any security incident caused by an improper
application of the sticker.
ATTENTION (for Taiwan use only)
44
Installation
To Next Page
Loading...
