Maintenance Manual x
Cautions
Notes
Do not touch the PCS100's end terminals with fingers or sharp metallic objects, such as
wire, tools, or needles.
Do not forcefully fold or apply pressure to any part of the PCS100 or damage it with sharp
objects.
Do not insert foreign objects into any part of the PCS100.
Use of the PCS100 may affect or impair the operation of any medical or implantable
electronic devices, such as an implantable cardiac pacemaker or an implantable
cardioverter defibrillator. Check with your electronic device manufacturer concerning the
effects that charging may have on such electronic devices before using the PCS100.
DO NOT USE PRIVATE POWER GENERATORS AS A POWER SOURCE FOR CHARGING.
INCORRECT INSTALLATION AND TESTING OF THE PCS100 COULD POTENTIALLY DAMAGE EITHER
THE BATTERY AND/OR THE PCS100 ITSELF. ANY RESULTING DAMAGE IS EXCLUDED FROM THE
E
QUIPMENT LIMITED WARRANTY.
DO NOT OPERATE THE PCS100 IN TEMPERATURES OUTSIDE ITS OPERATING RANGE OF -13°F TO
122°F (-25°C
TO +60°C).
Ensure that the PCS100's cables are positioned so it will not be stepped on, driven over,
tripped on, or subjected to damage or stress.
Do not use cleaning solvents to clean any of the PCS100's components.
Be careful not to damage the circuit boards or components during installation.
!
!
!
!
!
!
!
To Next Page
Loading...
