Hardware Introduction
Maintenance Manual 1
Hardware Introduction
Overview
Delta’s Power Conditioning System (PCS) is a bi-directional conversion system that converts power
between energy storage and grid, along with energy and grid power quality management features.
It supports demand charge management by peak shaving, enables load shifting for time-of-use
savings, and provides real power and reactive power compensation to improve power quality.
In addition, the PCS100 can operate by local or remote control. The local access is enabled through the
display panel and remote control access is performed through commands from a computer connected
to the PCS100 through an RS485 communication link using Modbus protocols.
Environmental Considerations
The PCS100 can be installed where there is TN or TT power distribution system.
The PCS100 system installation must meet the following guidelines:
The system must be installed on a level floor suitable electronic equipment. The floor must be
able to support heavy weight and wheeling.
The system must be installed in an area with temperature and humidity control free of conduc-
tive contaminants.
The cabinet must be installed in a standalone configuration.
To Next Page
Loading...
