Maintenance
Maintenance Manual 24
6. Slide the keyhole cover down to complete securing the handle.
Figure 25. Securing a Keyhole Slot
7. Rotate the switch handles to the ON position to engage the AC and DC inputs.
Figure 26. Engaging AC and DC Inputs
Rear Door
In order to install or remove components from the system, you first need to open the doors.
Read the “Safety Instructions” on page ix on the first at the beginning of this manual before
performing any service on the components. Ignoring safety instructions may result in injury,
damage or death.
DANGEROUS VOLTAGE LEVELS MAY BE PRESENT FOLLOWING DISCONNECTION. DO NOT OPEN THE
CABINET UNTIL A REASONABLE PERIOD OF TIME HAS ELAPSED.
D
EATH, SERIOUS INJURY, OR HARDWARE DAMAGE CAN RESULT IF CAUTION IS NOT TAKEN.
ON
AC DISCONNECT
OFF
ON
DC DISCONNECT
OFF
ON
AC DISCONNECT
OFF
ON
DC DISCONNECT
OFF
!
!