Maintenance
Maintenance Manual 166
5. Locate the nuts securing the B board to the chassis and remove them.
6. Slide and remove the B board assembly, which includes the fixed plate.
Figure 250. Removing a B Board Assembly
Installing a B Board Assembly
Installing the B board assembly requires angling the assembly at different angles. To prevent damage
to the interior or the B board assembly, make sure you are aware of the edges or corners of the
assembly when inserting into the location.
1. Orient the B board assembly so that the plate faces the interior of the cabinet and angle the left
edges through the middle of the cabinet. Take care not to touch other components to prevent
accidental damage.
2. Continue to insert the B board and carefully angle in the remaining side until the B board is situ-
ated above the installation area.
3. Lower the B board in place making sure the tabs on the plate are aligned with the bolts on the
cabinet.
4. Slide the B board in place and secure it to the chassis with the provided nuts.
Figure 251. Installing a B Board Assembly
To Next Page
Loading...
