Maintenance
Maintenance Manual 31
Opening a Control Box
The control box swings open to reveal the components on the rear side and the top internal section of
the cabinet.
1. Open the front door. See “Opening a Front Door” on page 20.
2. Loosen the captive screws securing the control box.
3. Grasp the control box and swing it open.
Figure 35. Opening a Control Box
Closing a Control Box
Before closing the control box, make sure the area is free of any cables that may have come loose.
1. Close the control box cover and tighten the captive screws.
Figure 36. Closing a Control Box
2. Close the front door. See “Closing a Front Door” on page 22.
To Next Page
Loading...
