Maintenance
Maintenance Manual 56
8. Hold the bottom and top of the heat exchanger and lift it up slightly.
9. Once the heat exchanger is off the bolts, remove it off the front door.
Figure 73. Removing a Heat Exchanger
10. Place the heat exchanger on a clean work surface.
Installing a Heat Exchanger
1. Hold the heat exchanger from the top and bottom. Align it on the front door so that the fan ports
are facing up.
2. Align the parameter of the heat exchanger with the bolts on the rear of the front door.
3. Insert the housing of the heat exchanger in the front door. Make sure that each bolt passes
through the holes on the housing.
Press the housing in until it is flush into the front door.
Figure 74. Installing a Heat Exchanger
To Next Page
Loading...
