Delta PCS100 - Page 9

Maintenance Manual viii
Maintenance Flowchart
Figure 1. Maintenance Flowchart
Start
Complete
Turn off PCS100
via host server
Turn off the AC/DC
disconnect switch on
the front panel
Service the
front cabinet
Open the
front panel
Close the front panel
(Make sure the front
panel is correctly
secured)
Follow the Maintenance
Manual to service PCS
(Note: Attentive to the
inner power warnings.
Areas below QSU1 and
QSU2 are still powered
and should be protected
with shields.)
YES
Open the
rear panel
Close the rear panel
(Make sure the rear
panel is correctly
secured)
Follow the Maintenance
Manual to service the
rear cabinet of PCS
(Note: Attentive to the
inner power warnings.)
NO