To Next PageTo Next Page
Need help?Do you have a question about the Delta SA180 and is the answer not in the manual?
Explains DANGER, WARNING, and CAUTION symbols used in the manual for hazard identification.
Advises on potential exposure to chemicals and necessary precautions.
Details the critical importance and methods for grounding the machine to prevent electric shock.
Steps to attach the belt unit to the machine's base.
Instructions for installing and tensioning the drive belt.
Attaching safety guards for the disc and belt components.
Instructions for attaching the abrasive disc to the disc plate.
Mounting the disc plate onto the motor shaft.
Adjusting the belt to ensure it runs correctly on the pulleys.
Explains DANGER, WARNING, and CAUTION symbols used in the manual for hazard identification.
Advises on potential exposure to chemicals and necessary precautions.
Details the critical importance and methods for grounding the machine to prevent electric shock.
Steps to attach the belt unit to the machine's base.
Instructions for installing and tensioning the drive belt.
Attaching safety guards for the disc and belt components.
Instructions for attaching the abrasive disc to the disc plate.
Mounting the disc plate onto the motor shaft.
Adjusting the belt to ensure it runs correctly on the pulleys.
General| Voltage | 120V |
|---|---|
| Sander type | Random orbital sander |
| Power source | Corded |
| No-load speed | 12000 OPM |
| Orbit diameter | 3/32 inch |
| Sanding pad size | 5 inch |
