Delta VFD007FP4EA-41 - Page 184

Chapter 11 Summary of Parameter SettingsCFP2000 Series
11-10
Pr.
Explanation
Settings
Factory
Setting
18: Preliminary count value attained, returns to 0
(Pr.02-19)
19: Base Block
20: Warning output
21: Over voltage warning
22: Over-current stall prevention warning
23: Over-voltage stall prevention warning
24: Operation mode indication
25: Forward command
26: Reverse command
27: Output when current >= Pr.02-33
28: Output when current < Pr.02-33
29: Output when frequency >= Pr.02-34
30: Output when frequency < Pr.02-34
31: Y-connection for the motor coil
32: △-connection for the motor coil
33: Zero speed (actual output frequency)
34: Zero speed include stop(actual output frequency)
35: Error output selection 1(Pr.06-23)
36: Error output selection 2(Pr.06-24)
37: Error output selection 3(Pr.06-25)
38: Error output selection 4(Pr.06-26)
39: Reserved
40: Speed attained (including Stop)
41: Reserved
42: Reserved
43: Reserved
44: Low current output (use with Pr.06-71~06-73)
45: UVW Output Electromagnetic valve Switch
46: Reserved
47: Closed brake output
48: Reserved
49: Reserved
50: Output for CANopen control
51: Output for RS485
52: Output for communication card
53: Fire mode indication
54: Bypass fire mode indication
55: Motor #1 Output
56: Motor #2 Output
57: Motor #3 Output
58: Motor #4 Output
59: Motor #5 Output
60: Motor #6 Output
61: Motor #7 Output
62: Motor #8 Output
63~65: Reserved
66: STO Logic A Output (Pr02-15)
67: Pressure Relief Indication
68: STO Logic B Output (Pr02-15)
69: Preheating Output Indication
02-16
~
02-17
Reserved

02-18
Multi-function output direction
0000h~FFFFh (0: N.O.; 1: N.C.）
0000

02-19
Terminal counting value attained
(returns to 0)
0~65500
0

02-20
Preliminary counting value
attained (not return to 0)
0~65500
0