Delta VFD007FP4EA-41 - Page 195

Chapter 11 Summary of Parameter SettingsCFP2000 Series
11-21
Pr.
Explanation
Settings
Factory
Setting
06-38
Motor Speed in rpm at
Malfunction
-32767~32767 rpm
Read
only
06-39
Reserved
06-40
Status of Multi-function Input
Terminal at Malfunction
0000h~FFFFh
Read
only
06-41
Status of Multi-function Output
Terminal at Malfunction
0000h~FFFFh
Read
only
06-42
Drive Status at Malfunction
0000h~FFFFh
Read
only
06-43
Reserved

06-44
STO Latch Selection
0：STO Latch
1：STO No Latch
0

06-45
Treatment to Output Phase Loss
Detection (OPHL)
0: Warn and keep operation
1: Warn and ramp to stop
2: Warn and coast to stop
3: No warning
3

06-46
Deceleration Time of Output
Phase Loss
0~65.535 sec
0.500

06-47
Current detection level of output
phase loss
0.00~100.00%
1.00

06-48
DC Brake Time of Output Phase
Loss
0~65.535sec
0.000

06-49
LvX Auto Reset
0: Disable
1: Enable
0

06-50
Time for Input Phase Loss
Detection
0.00~600.00 sec
0.20
06-51
Reserved

06-52
Ripple of Input Phase Loss
0.0~320.0 Vdc
60.0

06-53
Treatment for the detected Input
Phase Loss (OrP)
0: warn and ramp to stop
1: warn and coast to stop
0
06-54
Fault Code Record Index
0~6
Read
only
06-55
Derating Protection
0: constant rated current and limit carrier wave by
load current and temperature
1: constant carrier frequency and limit load current
by setting carrier wave
2: constant rated current(same as setting 0), but
close current limit
0

06-56
PT100 Detected Level 1
0.000~10.000V
5.000

06-57
PT100 Detected Level 2
0.000~10.000V
7.000

06-58
PT100 Level 1 Frequency
Protect
0.00~599.00Hz
0.00

06-59
PT100 activation level delay time
0~6000 sec.
60

06-60
Software Detection GFF Current
Level
0.0~6553.5 %
60.0

06-61
Software Detection GFF Filter
Time
0.00~655.35 sec
0.10
06-62
Reserved
06-63
Fault Record 1 (Day)
0~65535 days
Read
only
06-64
Fault Record 1 (Min)
0~1439 min
Read
only
06-65
Fault Record 2 (Day)
0~65535 days
Read
only