Delta VFD007FP4EA-41 - Page 357

Chapter 12 Description of Parameter Settings|CFP2000 Series
12.1-09-15
5: Stop State
CANopen Control Status
Factory Setting: Read Only
Settings 0: Not ready for use state
1: Inhibit start state
2: Ready to switch on state
3: Switched on state
4: Enable operation state
7: Quick stop active state
13: Err reaction activation state
14: Error state
Reserved
Reserved
CANopen Master Function
Factory Setting: 0
Settings 0: Disable
1: Enable
CANopen Master Address
Factory Setting: 100
Settings 0~127
~
Reserved
BACnet Dnet
Factory Setting: 10
Settings 0~127
BACnet Baud Rate
Factory Setting: 38.4
Settings 9.66~76.8 kbps
BACnet Device ID L
Factory Setting: 10
Settings 0~65535
BACnet Device ID H
Factory Setting: 0
Settings 0~63