EasyManuals Logo

Denon AVR-1306 User Manual

Denon AVR-1306
91 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
ENGLISH
16
System Setup System Setup
ENGLISH
PageDefault settingsSystem Setup
System setup items and default values (set upon shipment from the factory)
1
Speaker
Configuration
Input the combination of speakers in your system and their
corresponding sizes (SMALL for regular speakers, LARGE
for full-size, full-range) to automatically set the composition
of the signals output from the speakers and the frequency
response.
Front Sp.
Large
Center Sp. Surround Sp. Subwoofer
Small SmallYes
Subwoofer
Mode
This selects the subwoofer speaker for playing deep bass
signals.
3
Subwoofer mode = Normal
11, 12
2
Delay Time
This parameter is for optimizing the timing with which the
audio signals are produced from the speakers and
subwoofer according to the listening position.
13
Front
L & R
Center
Surround
L & R
Subwoofer
3.6 m 3.6 m 3.0 m3.6 m
12
15
Digital In
Assignment
This assigns the digital input terminals for the
different input sources.
Input
source
Digital
Inputs
CD AUX DVD / VDP TV / DBS
COAXIAL1 COAXIAL2 OPTICAL1 OPTICAL2
6
Crossover
Frequency
Sets the frequency (Hz) below which the bass sound of
the various speakers is to be output from the subwoofer.
4
180 Hz
13
5Test Tone
This adjusts the volume of the signals output from the
speakers and subwoofer for the different channels in order
to obtain optimum effects.
Front
L & R
Center
Surround
L & R
Subwoofer
0 dB 0 dB 0 dB0 dB
14
7
Auto
Surround
Mode
Auto surround mode function setting.
Auto Surround Mode = ON
15
Ext. In SW
Level
Sets the Ext. In Subwoofer channel playback level.
Ext. In SW Level = +15 dB
15
8

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-1306 and is the answer not in the manual?

Denon AVR-1306 Specifications

General IconGeneral
Power Output75 W per channel (8 ohms, 20 Hz - 20 kHz, 0.08% THD)
Component Video Inputs2
Digital Audio Inputs2 Optical, 1 Coaxial
AM/FM TunerYes
Dolby DigitalYes
DTSYes
Response Bandwidth10 Hz - 100 kHz
Signal-To-Noise Ratio98 dB
Total Harmonic Distortion0.08%
Input Impedance47 kOhm
Input Sensitivity200 mV
Preset Station Qty56
Frequency Response10 Hz - 100 kHz
Amplifier Output Details75.0 Watt - 8.0 Ohm - 20 - 20000 Hz - THD 0.08 %
Tuning RangeFM: 87.5 - 108.0 MHz, AM: 522 - 1611 kHz
Tuning DisplayFluorescent
Connector TypeRCA
Speaker Impedance6 - 16 Ohm
Dimensions434 x 151 x 363mm (W x H x D)
Channels7.1
Weight10.5 kg

Related product manuals