Denon AVR-1612 - Schematic Diagrams (3;16); MCU Part

58
System Setup
Set when changing Audyssey
®
Auto Setup settings, or when changing the audio, video, display
or other settings.
•If you change the speaker settings after performing Audyssey
®
Auto Setup, it will not be
possible to set Audyssey MultEQ
®
, Audyssey Dynamic EQ
®
and Audyssey Dynamic Volume
®
(vpage54, 55).
•Can be used without changing the settings. Please set if necessary.
Menu operation
1
Press AMP to set the remote control unit to AMP-operation
mode.
2
Press MENU.
The menu is displayed on the TV screen.
3
Press ui to select the menu to be set or operated.
4
Press ENTER or p to enter the setting.
•To return to the previous item, press RETURN B.
•Exiting the Menu, press MENU while the menu is displayed.
The menu display disappears.
Items that can be set with the “System Setup” procedure
Speaker Setup (vpage59)
HDMI Setup (vpage62)
Audio Setup (vpage63)
Option Setup (vpage63)
Language (vpage65)
Basic version
Advanced version
Information
Advanced version
BD